Waterproofing arr_right_inav

Single Component Polymer Waterproofing Mortar

Description Specifications Scope of Application FAQ Download

Description

VASA WM101 Single Component Polymer Waterproofing Mortar is a dry powder product formulated from high-quality cement, refined sand, fillers, polymer latex powder, and various other additives. It boasts excellent impermeability, non-toxic, harmless, and environmentally friendly features.

Specifications

PRODUCT INFOMATION

Product Technical Parameters	Packing Specification	20kg/bag
	Character	Gray powder
	Executive Standard	JC/T 984-2011 Type I
	Shelf Life	12 months when stored unopened in a cool, dry place.
	Operable Time	45min
	Operable Environment	Temperature 5-35°C. Avoid construction in rainy, windy (above grade 5)
	Consumption	2.0kg/m²/mm

APPLICATION PROCEDURE

· Substrate Treatment

Thoroughly clean the substrate from dust, oil, and any protruding or loose parts. Remove any defects with quick-repair mortar, ensuring no cracking or hollowing. Fully wet the substrate with clean water, but avoid standing water.

· Mortar Preparation

Refer to the packaging certificate for the correct amount of water. Add water to the mixing bucket first, then gradually add the powder while mechanically stirring until a uniform, lump-free paste is formed. The prepared mortar must be used within 45 minutes, and it is prohibited to add water again during use.

· Application of Mortar

For building exterior walls: Typically apply a thickness of 5mm to 8mm.

a. Apply the mixed mortar in 2 to 3 layers, based on the wall's flatness, ensuring the final layer is compacted and smoothed.

b. Apply subsequent layers after the previous layer has hardened.

c. After the final layer has hardened, perform water curing for at least 7 days.

For underground waterproofing projects: Typically apply a thickness of 6mm to 12mm.

a. Apply the mixed mortar in three layers, with each layer being 2mm to 4mm thick, ensuring the final layer is compacted and smoothed.

b. Apply subsequent layers after the previous layer has hardened.

c. After the final layer has hardened, perform water curing for at least 7 days.

TECNICAL INFOMATION

The product complies with the requirements outlined in type I products in JC/T 984-2011 "Polymer Cement Waterproof Mortar". The specific technical indicators are as follows:

ITEM			Data
Setting Time		Initial setting/min	≥45
		Final setting/h	≤ 24
Impermeability Pressure/MPa	Coating specimen	7d	≥0.4
	Mortar specimen	7d	≥ 0.8
		28d	≥ 1.5
Compressive Strength/MPa			≥ 18.0
Flexural Strength/MPa			≥ 6.0
Flexibility (Transverse Deformation Capacity)/mm			≥ 1.0
Bond Strength/MPa		7d	≥ 0.8
		28d	≥ 1.0
Alkali Resistance			No cracking, peeling
Heat Resistance			No cracking, peeling
Frost Resistance			No cracking, peeling
Shrinkage Rate/%			≤ 0.30
Water Absorption Rate/%			≤ 6.0

FEATURES AND BENEFITS

· Suitable for both positive and negative water pressure applications.

· Easier transportation and storage.

· Excellent impermeability.

· Strong adhesion to the substrate without peeling, suitable for application on damp substrates.

· Non-toxic, harmless, environmentally friendly, and easy to apply.

Scope of Application

· Waterproofing and seepage prevention projects for building exterior walls.

· Waterproofing projects for underground areas (such as pile heads, garages, tunnels, etc.).

FAQ

Q1: What are the main product series of VASA?

VASA's main product lines include tile and stone pasting series, waterproof mortar series, cement-based grouting material series, wall leveling and skimcoat series, inorganic flooring series, soil solidification products, etc.
Q2: Where is VASA's main production base?

VASA's main production bases are distributed throughout China, and there is also a factory in Johor Bahru, Malaysia.
Q3: What is VASA's production capacity?

The production capacity of VASA dry powder mortar products is approximately 7 million tons.
Q4: The production capacity of VASA dry powder mortar products is approximately 7 million tons.

The reference delivery time for VASA products is seven days within China, sea freight to South East Asia: 7-10 days; Europe/Americas: ~25–35 days; Latin America: ~20-45 days
Q5: Has VASA's product been certified for environmental protection? What are the certifications?

VASA's products have undergone environmental certification, including German GEV-EMICODE certification and French A+ certification.
Q6: What is the main packaging form of VASA products?

VASA's products are mainly packaged in valve pockets and transported on wooden pallets.
Q7: What are the auxiliary installation and construction supports?

We can provide construction videos of our main products to guide their construction.