Waterproofing arr_right_inav

Easy-apply Waterproofing Mortar

Description Specifications Scope of Application FAQ Download

Description

VASA WM201 Easy-apply Waterproofing Mortar is a dry powder product scientifically formulated from inorganic binding materials, refined sand, mineral additives, polymer resins, and various other additives. It can be used directly by adding water and stirring. It features stable volume, low shrinkage, crack resistance, non-toxic, harmless, and environmentally friendly properties.

Specifications

PRODUCT INFOMATION

The product complies with the requirements outlined in JC/T 984-2011 for flexural Polymer Cement Waterproof Mortar, specifically type II. The indicators are as follows:

Product Technical Parameters	Packing Specification	25kg/bag
	Character	Gray powder
	Executive Standard	JC/T984-2011 Type II
	Shelf Life	12 months when stored unopened in a cool, dry place.
	Operable Time	1h
	Operable Environment	Temperature 5-35°C. Avoid construction in rainy, windy (above grade 5)
	Consumption	1.3kg/m²/mm-1.7kg/m²/mm

TECNICAL INFOMATION

ITEM			Data
Setting Time		Initial setting/min, ≥	45
		Final setting/h, ≤	24
Impermeability Pressure/MPa	Coating specimen, ≥	7d	0.5
	Mortar specimen, ≥	7d	1.0
		28d	1.5
Compressive Strength/MPa, ≥			24.0
Flexural Strength/MPa, ≥			8.0
Flexibility (Transverse Deformation Capacity)/mm, ≥			1.0
Bond Strength/MPa, ≥		7d	1.0
		28d	1.2
Alkali Resistance			No cracking, peeling
Heat Resistance			No cracking, peeling
Frost Resistance			No cracking, peeling
Shrinkage Rate/%, ≤			0.15
Water Absorption Rate/%, ≤			4.0

APPLICATION PROCEDURE

· Substrate Treatment

Thoroughly clean the substrate from dust, oil, and any protruding or loose parts. Remove any defects with mortar, ensuring no cracking or hollowing. Fully wet the substrate with clean water, but avoid standing water.

· Mortar Preparation

Refer to the packaging certificate for the correct amount of water.

Add water to the mixing bucket first, then gradually add the powder while mechanically stirring until a uniform, lump-free paste is formed. The prepared mortar must be used within 1 hour, and it is prohibited to add water again during use.

· Application of Mortar

a. Apply a single layer thickness of 2mm to 4mm.

b. Depending on the required thickness, apply the mortar in multiple layers. Allow the first layer to harden before applying the next.

c. After the final layer hardens, perform water curing for at least 7 days.

d. Ensure the total thickness of the final mortar layer is not less than the design thickness.

CAUTIONS

· Use the prepared mortar within 1 hour.

· Do not add water to re-mix the initially set mortar.

· The construction temperature should be between 5-35℃. Avoid high temperatures, frost, and wind speeds above grade 5 during construction.

· Clean mixing tools before and after use.

· Avoid direct sunlight during application to prevent rapid loss of water and reduced strength.

FEATURES AND BENEFITS

· Flexible application, can be machine-sprayed or troweled

· Strong adaptability with adjustable water content

· Stable volume, low shrinkage, crack resistance

· Applicable on damp substrates

Scope of Application

· Waterproofing and seepage prevention projects for building exterior walls

· Waterproofing and moisture-proofing projects for interior walls, kitchens, and bathrooms

· Waterproofing projects for underground areas (such as pile heads, garages, tunnels, etc.)

FAQ

Q1: What are the main product series of VASA?

VASA's main product lines include tile and stone pasting series, waterproof mortar series, cement-based grouting material series, wall leveling and skimcoat series, inorganic flooring series, soil solidification products, etc.
Q2: Where is VASA's main production base?

VASA's main production bases are distributed throughout China, and there is also a factory in Johor Bahru, Malaysia.
Q3: What is VASA's production capacity?

The production capacity of VASA dry powder mortar products is approximately 7 million tons.
Q4: The production capacity of VASA dry powder mortar products is approximately 7 million tons.

The reference delivery time for VASA products is seven days within China, sea freight to South East Asia: 7-10 days; Europe/Americas: ~25–35 days; Latin America: ~20-45 days
Q5: Has VASA's product been certified for environmental protection? What are the certifications?

VASA's products have undergone environmental certification, including German GEV-EMICODE certification and French A+ certification.
Q6: What is the main packaging form of VASA products?

VASA's products are mainly packaged in valve pockets and transported on wooden pallets.
Q7: What are the auxiliary installation and construction supports?

We can provide construction videos of our main products to guide their construction.