Floor Mortar arr_right_inav

Floor Leveling Mortar

Description Specifications Scope of Application FAQ Download

Description

VASA AS15 Floor Leveling Mortar is formulated with ordinary Portland cement as an inorganic binder, precisely graded sand as the aggregate, and a mix of functional additives. This product is ready to use after mixing with water and offers excellent crack resistance, easy application, and environmentally friendly features.

Specifications

PRODUCT INFORMATION

This product complies with the DS standards in GB/T25181-2019 "Premixed Mortar." Main indicators are as follows:

NO.	ITEM	Tecnical indicator
1	Appearance	Uniform,without lumps
2	Water retention rate ≥	88%
3	Setting time	3-9 h
4	2h consistency loss rate≤	30%
5	Compressive strength ≥	15MPa；20MPa；25MPa

Note:Compressive strength depends on the actual grade of supply.

APPLICATION PROCEDURE

Construction Tools

Mortar mixer, scraper, spatula, etc

Construction Process

· Substrate Treatment

The surface should be clean and solid. Remove any dust, grease, particles, or other loose materials that may affect adhesion. The surface should be moistened before applying the leveling mortar, and the application should begin when the surface is free of visible water. For surfaces with low strength or high absorbency, apply two coats of VASA PMC-500 primer before proceeding. For smooth surfaces, roughen or create a bonding texture.

· Level Marking

Use a level to mark the standard height and design thickness on walls and columns.

Plaster control points around the wall according to the leveling control line, , the size of the control points are generally 50x50mm, the horizontal and vertical spacing is 1.5-2.0 meters. Create control points around the walls with leveling mortar (VASA AS15) to guide the application.

· Mortar Mixing

Adjust the water addition based on the product certificate and specific requirements. Add water first, then slowly add the powder while mixing. Mix until the mortar is uniform and free of lumps, then allow it to stand for 3-5 minutes before mixing again for 15-30 seconds. The mortar is now ready to use.

· Leveling Application

Spread the mortar evenly over the floor surface, ensuring the thickness is slightly higher than the control points by 1-2mm. Use a screed to level the mortar, following the height of the control points. Compaction and smoothing must be completed before the mortar sets. The minimum application thickness should not be less than 10mm. For sloped areas, follow the design specifications.

· Cleaning and Curing

After the mortar sets and hardens, maintain moisture by curing for at least 7 days.

TECHNICAL INFORMATION

Packing Specification	40kg/50kg/bulk
Character	Gray powder
Mixing Ratio	Refer to the product certificate
Shelf Life	3 months when stored in a cool, dry place with unopened packaging.
Executive Standard	GB/T25181-2019 "Premixed Mortar" DS
Workable Time	2h
Construction Consumption	1.7-2.0kg/m²/mm, depending on surface conditions and application methods
Application Environment	5-35°C, avoid high temperatures, frost, direct sunlight, wind, or rain during outdoor construction

FEATURES AND BENEFITS

· High crack resistance

· Easy application

· Environmentally friendly

Scope of Application

Floor leveling projects where the thickness exceeds 10mm.

FAQ

Q1: What are the main product series of VASA?

VASA's main product lines include tile and stone pasting series, waterproof mortar series, cement-based grouting material series, wall leveling and skimcoat series, inorganic flooring series, soil solidification products, etc.
Q2: Where is VASA's main production base?

VASA's main production bases are distributed throughout China, and there is also a factory in Johor Bahru, Malaysia.
Q3: What is VASA's production capacity?

The production capacity of VASA dry powder mortar products is approximately 7 million tons.
Q4: The production capacity of VASA dry powder mortar products is approximately 7 million tons.

The reference delivery time for VASA products is seven days within China, sea freight to South East Asia: 7-10 days; Europe/Americas: ~25–35 days; Latin America: ~20-45 days
Q5: Has VASA's product been certified for environmental protection? What are the certifications?

VASA's products have undergone environmental certification, including German GEV-EMICODE certification and French A+ certification.
Q6: What is the main packaging form of VASA products?

VASA's products are mainly packaged in valve pockets and transported on wooden pallets.
Q7: What are the auxiliary installation and construction supports?

We can provide construction videos of our main products to guide their construction.