Inorganic Textured Mortar

Description Specifications Scope of Application FAQ Download

Description

VASA DPC100 Inorganic Textured Mortar is a premium mortar material composed of carefully graded sand, white inorganic cementing materials, fine fillers, and multiple high-performance additives. The product is naturally sourced, of superior quality, and integrates plastering and decorative functions. It can be used to create a variety of decorative effects depending on the construction technique.

Specifications

PRODUCT INFORMATION

The product complies with the M10 standard requirements for dry-mixed plaster mortar (G) as specified in GB/T 25181-2019 "Pre-mixed Mortar." Key performance indicators are as follows:

NO.	ITEM		Tecnical indicator
1	Appearance		Uniform,without lumps or impurities
2	Water retention rate, %		≥88
3	Final setting time/h		3-12
4	2h consistency loss rate/%		≤30
5	14d tensile bond strength /MPa		≥0.20
6	28d shrinkage rate /%		≤0.20
7	28d Compressive strength/MPa		≥10
8	Freeze-thaw resistance	Strength loss rate/%	≤25
		Weight loss rate/%	≤5

TECHNICAL INFORMATION

Product Technical Parameters	Packing Specification	25kg/bag
	Character	white powder
	Executive Standard	GB/T 25181-2019 "Pre-mixed Mortar"
	Workable Time	60 mins
Construction Technical Parameters	Operable Environment	Temperature 5-35°C
Construction Technical Parameters	Consumption	coarse powder: 1.5~1.8kg/mm*m², actual consumption depending on wall flatness, application method, and decorative style.

APPLICATION PROCEDURE

· Substrate Treatment

(1)The substrate should be solid and clean, free from cracks, dust, oil stains, seepage, and hollowing. Any cavities or depressions should be filled and leveled with this product beforehand.

(2)At the junctions of different substrates, reinforce with alkali-resistant fiberglass mesh with a width of no less than 250mm and an overlap of no less than 100mm on each substrate.

(3)Before application, thoroughly moisten the substrate with water. Allow the surface to dry without standing water before applying the mortar.

· Mortar Mixing

Add the specified amount of water (as indicated on the certificate of conformity) to the mixing bucket first, then slowly add the powder while stirring quickly with a mixer until uniformly mixed. Let the mixture stand for 3 minutes, then stir again for 10-15 seconds before use. The prepared mortar must be used within 1 hour. Do not add water to re-mix hardened mortar.

· Leveling Application

(1)Setting Screeds:Before leveling, set screeds on the wall. For walls less than 3.5 meters high, use vertical screeds with a spacing of no more than 1.5 meters. For walls over 3.5 meters high, use horizontal screeds with a spacing of no more than 2 meters.

(2)Manual Plastering:For large areas, apply in layers, starting with edges and then covering the larger area. Each layer should be slightly thicker (1-2mm) than the screeds. Use a straightedge to smooth out the surface from bottom to top. The thickness of a single application should be 5-15mm.

(3)Curing:After the mortar has set and hardened (24 hours at room temperature), keep the surface moist with water for at least 3 days.

· Surface Decoration

Textured Finish Application: Hold the trowel at a 45°-60° angle and evenly apply a coat of the plaster, approximately 2-3mm thick, on the leveled base layer. Apply enough pressure to expose the sand grains slightly. After waiting for 3-5 minutes, firmly press the trowel against the surface and move it in a circular, clockwise motion to create the desired texture. When the surface no longer appears wet and does not stick to the fingers upon touch, press the trowel flat against the surface to smooth and finish it. The entire wall should be completed continuously in one application.

Veneer decoration construction shall be in accordance with the requirements of design and style for grain production, the construction process varies with different decorative styles, and it will be subject to on-site guidance process.

FEATURES AND BENEFITS

· Excellent workability with no sagging.

· Smooth application and simple process, with good applicability.

· Low-carbon, environmentally friendly, moisture-resistant, breathable, and mold-fre

Scope of Application

This product is suitable for the decoration of both interior and exterior walls, as well as ceilings in residential buildings, villas, hotels, office buildings, schools, and basements, whether for new construction or renovation projects.

FAQ

Q1: What are the main product series of VASA?

VASA's main product lines include tile and stone pasting series, waterproof mortar series, cement-based grouting material series, wall leveling and skimcoat series, inorganic flooring series, soil solidification products, etc.
Q2: Where is VASA's main production base?

VASA's main production bases are distributed throughout China, and there is also a factory in Johor Bahru, Malaysia.
Q3: What is VASA's production capacity?

The production capacity of VASA dry powder mortar products is approximately 7 million tons.
Q4: The production capacity of VASA dry powder mortar products is approximately 7 million tons.

The reference delivery time for VASA products is seven days within China, sea freight to South East Asia: 7-10 days; Europe/Americas: ~25–35 days; Latin America: ~20-45 days
Q5: Has VASA's product been certified for environmental protection? What are the certifications?

VASA's products have undergone environmental certification, including German GEV-EMICODE certification and French A+ certification.
Q6: What is the main packaging form of VASA products?

VASA's products are mainly packaged in valve pockets and transported on wooden pallets.
Q7: What are the auxiliary installation and construction supports?

We can provide construction videos of our main products to guide their construction.