Description

BiAn S160 Lightweight Gypsum Plaster is an interior wall base plastering material made from desulfurized gypsum powder, vitrified microbeads, and various additives. This product does not use phosphogypsum, which contains numerous impurities, has strong acidity that may cause product quality instability, and contains various radioactive elements that can cause irreversible harm to living organisms and the environment. The product can be applied manually or by machine spraying, reducing labor intensity and shortening construction time.

Specifications

PRODUCT INFORMATION

The product complies with the requirements of GB/T 28627-2023 LA for gypsum plaster. The key technical indicators are as follows:

NO.	ITEM		Tecnical Indicator
1	Setting Time	Initial	≥ 1
2	Setting Time	Final	≤ 8
3	Water retention rate/%		≥ 70
4	Bulk Density/ (kg/m³)		≤ 1000
5	Flexural Strength/MPa		≥ 1.0
6	Compressive Strength/MPa		≥2.5
7	Tensile Bond Strength/MPa		≥ 0.3
8	Calcium Sulfate Content /%		≥ 60
9	pH Value		≥ 7
10	Radionuclide Limits		Internal Exposure Index Ira ≤ 1.0 External Exposure Index Ira≤ 1.0

APPLICATION PROCEDURE

· Substrate Treatment:The substrate should be solid, clean, free of dust, oil, water, and hollows. Any holes or depressions should be filled and leveled with this product. New walls should be sufficiently hardened before construction. Before application, the wall surface should be coated 1-2 times with a specialized gypsum mortar interface agent for reinforcement.

· Mortar Preparation:Apply the amount of water indicated on the certificate, first pour clean water into the mixing bucket, gradually add the gypsum plaster while stirring. Mix until uniform and free of lumps. It is recommended to use an electric mixer on low speed for better results. After mixing, let the slurry stand for 5 minutes, then stir again for 2-3 minutes before use. The prepared product should be used within 1 hour, and it is recommended to mix as needed.

· Leveling Application:Apply the mixed slurry to the wall, smooth it with a trowel, or use a straight edge to scrape it along the guiding strips. For the first application, it is recommended to apply a thin layer to improve adhesion to the substrate. Each layer should not exceed 15mm in thickness. If a thicker leveling layer is required, it should be applied in multiple coats. Putty can only be applied after the gypsum plaster is completely dry.

TECHNICAL INFORMATION

Product Technical Parameters	Packing Specification	25kg/12kg
	Character	Gray or yellow powder
	Executive Standard	GB/T 28627-2023 LA
	Shelf Life	6 months
	Wet Material Density	The wet powder volume for 1 ton of S160 Lightweight Gypsum Plaster is 1.6m³ (±5% deviation)
Construction Technical Parameters	Construction Environment	Working temperature 5-35°C
	Consumption	6.0-6.5kg/cm*m², recommended consumption may vary based on wall flatness and construction method
	Operational Time	60min

FEATURES AND BENEFITS

· Good workability, high coverage, and can be applied in thick layers without sagging

· Smooth application, fast setting, and early strength, making the construction process easy and efficient

· No shrinkage, cracking, hollowness, or delamination, solving the defects of traditional plastering

· Made from neutral materials that are human-friendly, safe, environmentally friendly, insulating, and soundproofing

Scope of Application

Leveling the walls and ceilings of dry interior areas in residential, office, and public buildings. It can be used for leveling concrete walls, aerated concrete block walls, ALC wall panels, and other substrates.

FAQ

Q1: What are the main product series of VASA?

VASA's main product lines include tile and stone pasting series, waterproof mortar series, cement-based grouting material series, wall leveling and skimcoat series, inorganic flooring series, soil solidification products, etc.
Q2: Where is VASA's main production base?

VASA's main production bases are distributed throughout China, and there is also a factory in Johor Bahru, Malaysia.
Q3: What is VASA's production capacity?

The production capacity of VASA dry powder mortar products is approximately 7 million tons.
Q4: The production capacity of VASA dry powder mortar products is approximately 7 million tons.

The reference delivery time for VASA products is seven days within China, sea freight to South East Asia: 7-10 days; Europe/Americas: ~25–35 days; Latin America: ~20-45 days
Q5: Has VASA's product been certified for environmental protection? What are the certifications?

VASA's products have undergone environmental certification, including German GEV-EMICODE certification and French A+ certification.
Q6: What is the main packaging form of VASA products?

VASA's products are mainly packaged in valve pockets and transported on wooden pallets.
Q7: What are the auxiliary installation and construction supports?

We can provide construction videos of our main products to guide their construction.